Although Apple doesn’t provide a way to remove water from your iPhone, the majority of the most recent models are water-resistant. Strangely, the water ejection capability is included in both Samsung’s Galaxy Watch and the Apple Watch.
You may have noticed that if you drop your iPhone by mistake into the shower or swimming pool, the water gets inside the speaker grills and muffles the sound until it goes out.
Does Rice Really Work?
Placing the iPhone speaker in a bag of rice for a whole day is one of the most often used methods for removing water from it. Yes, rice can help your iPhone absorb moisture, but it takes a whole day for the process to happen.
Thankfully, there are quicker and simpler ways to remove water from the iPhone. Let’s investigate them.
Before We Begin
After the iPhone 7, the majority of iPhones were made to withstand dust, water, and splashes. Additionally, Apple states that regular wear could cause a decrease in water resistance, which is not permanent. Furthermore, there is no warranty of any kind for it. This is the inventory.
- iPhone 6 and older – no water resistance
- iPhone 7 and 7 Plus- IP67
- iPhone 8 and 8 Plus – IP67
- iPhone X and XR- IP67
- iPhone Xs and Xs Max- IP68
- iPhone 11, 11 Pro, and 11 Pro Max- IP68
- iPhone SE 2020- IP68
- iPhone 12 Mini, 12, 12 Pro, and 12 Pro Max- IP68
In this case, your phone can withstand a maximum depth of 2 meters for up to 30 minutes according to IEC standard 60529, whereas IP67 indicates that it can withstand a maximum depth of 1 meter for up to 30 minutes.
There are two instances, though, when the IP68-rated iPhones can withstand water up to varying depths. The iPhone 12 series promises up to 6 meters of water resistance for 30 minutes, whereas the iPhone SE 2020 only claims to be water resistant for up to 1 meter.
How Does It Work?
The techniques listed below all employ sound frequencies that force the water molecules stuck between the iPhone’s grill and speaker. Any of these approaches can be used with a comparable degree of success.
Get Water out of iPhone Speakers
Wipe your iPhone with a fresh cloth if you drop it in the shower or swimming pool. If you inadvertently spill any other liquid—tea, coffee, etc.—be sure to rinse it under cold, running water first, being careful not to use too much pressure.
After that, give it a quick wipe with a clean towel. Be careful not to charge your smartphone until it is entirely dry as there may still be residual moisture in the lightning port.
1. With an App
The first approach is entirely manual. To get the water to spill out of the iPhone, we’re going to utilize a straightforward app to generate a low frequency sound that will agitate the water droplets caught in the water grill. Turn on your iPhone, if you haven’t already started.
Open the App Store and download the Sonic app. After the app has downloaded, place the iPhone on a flat surface and launch it. Press and hold the app to select a preferred frequency. The ideal frequency range is 100–200 Hz. Press the “Play” button.
After letting the program run for a short while, you should notice tiny water droplets emerge from the speaker grills. Next, wipe the speaker grill with a fresh towel. Until there is no longer any water leaking out, repeat the procedure multiple times. You’re done if you can use your iPhone to play an audio or video and hear if the noises seem natural.
The drawback of this approach is that it may not be enough to completely eject the water droplets due to its monotonous frequency. Because they release the water droplets rapidly through a burst of sound, the other two approaches work better.
2. With Siri Shortcuts
Try the Water Eject shortcut if you have Siri Shortcuts loaded on your iPhone. It operates using the same idea as the Sonic app, which is to create a sound to immediately expel the water out of the speaker grill. This is how it functions.
If you haven’t already, download the Shortcuts app from the App Store. Use this link to download and install Water Eject. Just press the shortcut icon to launch it from the Shortcuts app when it has been installed.
It should begin spitting water out of the grills, but it would play a sound frequency that might not be audible to you. Play an audio file to verify that the speaker has resumed its regular sound after it is finished.
3. With a Website
By going to fixmyspeakers.com, you can extract water from your iPhone in another simple method. The website just performs one function and is really basic. Water is removed from the speakers by it. To start a sound sequence, just tap the website’s large, single button.
After the water stops spurting out of the speaker grills, you can press the button once more to silence the sound.